How to Change a Water Filter in a Whirlpool Refrigerator

While a Whirlpool refrigerator's water filter can provide clean, fresh drinking water, it doesn't last forever. How do you know the filter needs replacing? A bad smell or taste of filtered water can be a common sign. Learn how to change Whirlpool refrigerator water filter with easy-to-follow steps, how often it should be changed, and how to troubleshoot problems.

Why, When, Where & How to Change Whirlpool Refrigerator Water Filter

Though changing a water filter is simple and straightforward, not knowing the facts behind it can mean this important refrigerator maintenance gets neglected. We'll discuss how to change Whirlpool refrigerator water filter as well as why it's necessary, when to do so and where they're located.

Do I Really Need to Change my Refrigerator Water Filter?

Changing the filter is one of the only ways to ensure clean, fresh drinking water. Over time, the particles and contaminants that the filter screens out will clog the filter, leaving it unable to do its job. This means that these impurities don't get filtered and remain in your drinking water.

Here's how to tell when refrigerator water filter needs replacing:

• Refrigerator water tastes bad
• Filtered water has a strange smell
• Water pressure decreases when water is dispensed

How Often Should I Replace My Whirlpool Water Filter?

Changing the filter every 6 months should prevent bad-tasting water or pressure issues. However, how often to change refrigerator water filter also depends on its rate of flow and how frequently it's used. Constant usage and faster flow rates may require more frequent changes.

How Do I Change My Whirlpool Water Filter?

Whirlpool refrigerator water filters can be found either in the upper right-hand corner of the refrigerator's interior or behind the base grille. Some filters are twist-in models, while others are push-in. Check your use and care manual to determine where your filter is located and the correct model filter for your refrigerator.

Here's how to change Whirlpool refrigerator water filter in 8 simple steps:

1. Locate the water filter: most are located in the upper right-hand corner of the interior or behind the base grille.
2. Open the compartment or cover: this can involve lifting the compartment door up or pulling it down. Base grille filters may have an eject button to release the filter.
3. Pull out the old filter and discard: depending on the filter model, you may need to twist it counterclockwise or pull it straight out.
4. Open the new filter: if the filter has O-rings, remove the protective cover but make sure the rings remain in place.
5. Insert the new filter into the slot: make sure any arrows or grooves are properly aligned.
6. Lock in place: some filters should be twisted clockwise until secure, while others are pushed in until locked in place.
7. Close any compartment doors: ensure they're snapped into place to keep the filter secure and free of debris.
8. Flush the filter: dispense and dispose of 4 gallons of water to flush the waterline of any lingering contaminants.

Image Credit: Whirlpool

What Do I Do if My Whirlpool Refrigerator Water Filter is Stuck?

When this happens, first check your user manual to confirm that you've followed the proper changing instructions. If the filter remains stuck, there are specific interventions for base grille and interior filters.

Use these troubleshooting tips when you find your base grille Whirlpool refrigerator water filter stuck:

• Make sure any eject buttons are pushed all the way in to completely disengage the filter.
• For twist-in models, cover the filter cap with a piece of cloth and use pliers to give the cap a one-quarter turn.

Here's how to troubleshoot a stuck interior filter:

1. Ensure that the water compartment door is completely open so there is adequate space to remove the filter. You may need to remove a refrigerator shelf to allow the door to open properly.
2. A buildup of water pressure can also make the filter difficult to remove. Decrease any water line pressure by turning off the refrigerator's water supply and dispensing any lingering water.

Your Whirlpool refrigerator repair Columbus experts can answer any question, from how to change Whirlpool refrigerator water filter to malfunction concerns. Call Capital City Appliance Service for all your kitchen appliance needs!

How to Change a Water Filter in a Whirlpool Refrigerator

Source: https://www.capitalcityapplianceservice.com/blog/how-to-change-whirlpool-refrigerator-water-filter/

Share this post